Direct Factory Padel Rackets For Beginners Supplier

The frame utilizes a hybrid lay‑up of 30 % carbon fiber and 70 % fiberglass reinforced epoxy, delivering a tensile modulus of approximately 45 GPa in the longitudinal direction while keeping the

Get A Quote

Description

Direct Factory Padel Rackets for Beginners

The frame utilizes a hybrid lay‑up of 30 % carbon fiber and 70 % fiberglass reinforced epoxy, delivering a tensile modulus of approximately 45 GPa in the longitudinal direction while keeping the overall density below 1.45 g/cm³.

This composition yields a flexural stiffness of about 12 Nm/deg, which translates to a controlled power transfer suitable for players still developing swing technique.

Weight Distribution and Swing Dynamics

Each racket is balanced to a head‑light configuration with a balance point located 265 mm from the butt cap, resulting in a swingweight of roughly 210 kg·cm².

The total mass ranges from 340 g to 360 g, allowing novice users to achieve faster racket head speed without excessive fatigue during extended practice sessions.

Vibration damping is achieved through a viscoelastic insert in the handle, reducing peak frame acceleration by approximately 18 % compared with a solid‑core reference.

Surface Texture and Ball Interaction

The striking surface features a sand‑blasted finish with an average roughness (Ra) of 8 µm, which increases the coefficient of friction with the felt cover to about 0.42, enhancing spin generation on off‑center hits.

String pattern options include 16×19 and 18×20 configurations, both maintaining a string bed stiffness of roughly 210 N/mm, providing a consistent feel across varied impact locations.

Customization Options

Length adjustment: 455 mm to 470 mm in 5 mm increments.
Grip size: L0 (100 mm), L1 (106 mm), L2 (112 mm) circumference.
String tension range: 22 lb to 28 lb, adjustable per player preference.
Paint finish: matte, gloss, or UV‑resistant custom colors.

Quality Control and Testing Protocols

Every rack undergoes a three‑point bend test to verify flexural stiffness within ±5 % of the target value, followed by an impact fatigue test simulating 5 000 forehand strokes at 30 m/s.

Weight is measured with a precision balance (±0.5 g) and balance point is verified using a laser‑based profilometer; deviations beyond ±2 mm trigger rework.

Surface roughness is sampled via a contact profilometer on five locations per frame, ensuring Ra remains within 7‑9 µm across the striking zone.

Application Suitability for Beginner Players

The combination of a head‑light balance and moderate stiffness lowers the torque required to initiate a swing, helping novices develop proper wrist mechanics without over‑reliance on arm strength.

A larger effective sweet spot—approximately 55 cm²—results from the optimized string bed geometry and surface texture, reducing the penalty of off‑center hits and encouraging consistent ball placement.

Vibration dampening in the handle minimizes transmitted shock, decreasing the likelihood of elbow discomfort during prolonged training sessions.

Direct Factory padel rackets for beginners Supplier

Typical Specifications

Parameter	Typical Value	Unit	Adjustable Range
Frame Mass	350	g	340‑360
Balance Point	265	mm from butt	255‑275
Flexural Stiffness	12	Nm/deg	10‑14
Surface Roughness (Ra)	8	µm	7‑9
String Bed Stiffness	210	N/mm	190‑230

Frequently Asked Questions

Can the racket length be customized?: Yes, length can be adjusted in 5 mm increments between 455 mm and 470 mm to match player height and reach preferences.
What information is required before quotation?: We need the desired weight range, grip size, string pattern, and any special paint or branding requirements.
What materials are available for the frame?: Our standard lay‑up uses a 30 % carbon‑fiber / 70 % fiberglass hybrid; alternative ratios or full‑carbon options are available upon request.
How is quality inspected?: Each unit undergoes flexural stiffness, weight, balance, impact fatigue, and surface roughness checks as outlined in our QC protocol.
What packaging methods are available for export?: Rackets are packed in individual foam sleeves, placed in double‑wall cartons with corner protection, and can be palletized for container loading.
What is the typical production lead time?: Lead time ranges from 18 to 25 working days after final specification approval, depending on order volume and customization complexity.