Wholesale Pink Padel Balls – Technical Overview

Padel balls used in competitive play must meet strict standards for bounce consistency, durability, and visibility. The pink variant adds high‑visibility coloring for low‑light courts while retaining the same performance specifications as standard balls.

Core Material Construction

The inner core consists of a natural rubber compound with a Shore A hardness of 60±5, providing the elastic modulus required for predictable energy return. The core is molded to a nominal diameter of 6.35 mm before felt application.

Felt Composition and Surface Treatment

Outer felt is a blend of 65 % wool and 35 % nylon, treated with a water‑repellent fluorocarbon finish to reduce water absorption. The felt thickness is controlled to 2.0 mm ±0.1 mm, influencing aerodynamic drag and spin generation.

Dimensional and Weight Specifications

Finished balls measure 6.35 cm ±0.03 cm in diameter and weigh 56.0 g ±0.5 g. These tolerances ensure compliance with International Padel Federation (IPF) regulations for official match play.

Bounce and Rebound Characteristics

When dropped from a height of 2.54 m onto a rigid steel surface, the ball rebounds to a height between 1.35 m and 1.45 m. This range corresponds to a coefficient of restitution of 0.53‑0.57, verified across production batches using a laser‑based drop test rig.

Durability and Wear Resistance

Abrasion resistance is evaluated by rubbing the felt surface against a standardized sandpaper grid for 500 cycles; acceptable samples show less than 5 % loss in felt mass. Pressure retention is measured after 48 hours at 20 °C, with internal pressure decay limited to 0.02 bar.

Typical Applications in Padel Facilities

• Indoor clubs with controlled lighting where high‑visibility pink improves player reaction time.
• Outdoor courts exposed to UV radiation; the felt’s fluorocarbon finish mitigates degradation.
• Training centers requiring consistent ball response for repetitive drills.
• Tournament venues needing balls that meet IPF certification for official matches.

Quality Control Procedures

Each production lot undergoes three inspection stages: (1) raw material verification via FTIR spectroscopy for rubber purity, (2) in‑process dimensional checks using laser micrometers, and (3) final performance testing of bounce height and pressure on a calibrated rig. Statistical process control limits are set at ±2 σ for critical parameters.

Customization Options

• Logo printing using water‑based inks with adhesion promoter, tolerable to 500 abrasion cycles.
• Adjustable internal pressure ranging from 0.06 bar to 0.09 bar for altitude‑specific play.
• Alternative felt blends (e.g., 80 % wool/20 % nylon) for enhanced durability on abrasive surfaces.

Packaging and Logistics

• Standard bulk pack: 60 balls per polyethylene‑lined carton, dimensions 30 × 30 × 20 cm.
• Optional palletization: 1,200 balls per pallet with corner protectors and stretch film.
• Export‑ready packaging includes moisture‑barrier sachets and shock‑absorbing corner inserts.

Frequently Asked Questions

For technical consultation or to request a detailed quotation, please contact our sales team.