China Temporary Travel Pickleball Net Supplier
A temporary travel pickleball net system is designed for quick setup and takedown in environments where permanent installation is not feasible. The unit consists of collapsible poles, a tensioned
China Temporary Travel Pickleball Net Supplier
Product Overview
A temporary travel pickleball net system is designed for quick setup and takedown in environments where permanent installation is not feasible. The unit consists of collapsible poles, a tensioned net, and a compact carrying case that together weigh under 8 kg. It meets the official pickleball net height of 0.914 m at the sidelines and 0.86 m at the center, providing a regulation‑compliant playing surface for recreational or tournament use.
Technical Specifications
Key dimensional and performance parameters are listed below. Values are typical for standard configurations; exact figures can be adjusted according to project requirements.
| Parameter | Value | Notes |
|---|---|---|
| Overall Width (between poles) | 6.10 m | Matches official court width |
| Net Height at Sideline | 0.914 m | Regulation standard |
| Net Height at Center | 0.86 m | Slight dip for ball trajectory |
| Mesh Size | 45 mm × 45 mm | UV‑stabilized polyethylene |
| Frame Material | 6063‑T5 aluminum alloy | Powder‑coated, corrosion‑resistant |
| Total System Weight | 7.5 kg | Includes poles, net, and carry bag |
Material Construction
The pole shafts are extruded from 6063‑T5 aluminum, selected for its high strength‑to‑weight ratio and ability to withstand repeated assembly cycles. A powder‑coat finish provides a barrier against UV exposure and salt‑air corrosion, extending service life in coastal or high‑humidity locations. The net is fabricated from high‑density polyethylene (HDPE) yarns woven into a 45 mm mesh, treated with a UV inhibitor to reduce tensile strength loss over outdoor exposure. All connectors are made from glass‑filled nylon, offering impact resistance and a low‑friction surface for quick release.
Design Features for Portability
Each pole set telescopes into three sections, locking via a spring‑loaded pin that can be engaged with one hand. The net attaches to the poles through a series of adjustable tension cords equipped with cam‑buckles, allowing precise height adjustment without tools. When disassembled, the components nest inside a reinforced polyester carry bag measuring 35 cm × 20 cm × 15 cm, which includes interior straps to prevent shifting during transport. The total packed volume is less than 10 liters, suitable for storage in a vehicle trunk or equipment closet.
Applications and Use Cases
Temporary travel nets are ideal for situations where a permanent court is impractical or cost‑prohibitive. Examples include multi‑purpose community centers that host pickleball only a few days per week, school gymnasiums requiring rapid conversion between sports, and corporate wellness events held in parking lots or open fields. Because the system meets regulation dimensions, it can be used for sanctioned recreational play while eliminating the need for costly court construction.
Customization Options
Beyond the standard configuration, several parameters can be tailored to suit specific project needs. Adjustments are made at the quotation stage and may affect lead time.
- Net length options ranging from 5.0 m to 6.4 m for non‑standard court layouts
- Frame color choices including white, gray, or custom RAL shades
- Add‑on accessories such as ground stakes, weighted bases, or edge protection pads
- Branding areas on the net or carry bag for logo application via screen printing
- Alternative net materials such as polypropylene for increased abrasion resistance
Quality Control and Testing
Each production batch undergoes a series of inspections before shipment. Dimensional verification is performed on a coordinate measuring machine to confirm pole length and net height tolerances within ±2 mm. Tension cords are load‑tested to 150 N to ensure they maintain net tightness under typical play conditions. UV resistance is assessed using accelerated weathering chambers simulating 1000 hours of exposure, with post‑test tensile strength retention exceeding 85 %. Final visual inspection checks for surface defects, coating uniformity, and proper labeling.
Packaging and Shipping
Systems are packed in individual corrugated cartons with internal foam inserts to protect poles and net surfaces. Each carton is labeled with part number, quantity, and handling instructions. For bulk orders, cartons are stacked on pallets, secured with stretch film, and corner‑boarded to prevent shifting during transit. Shipping can be arranged via sea, air, or express courier, with all necessary export documentation provided.
Lead Time and Ordering Process
Standard lead time for stock‑keeping units is 10‑15 working days after receipt of purchase order. Customized configurations typically require 20‑30 working days, depending on the complexity of material or branding changes. Minimum order quantity is one set for samples and five sets for regular production. Samples can be dispatched via express courier upon request, with shipping costs borne by the requester.
Frequently Asked Questions
Yes, the tension cords feature cam‑buckles that allow incremental height changes of ±5 cm, enabling lower nets for beginner play or higher nets for advanced drills.
Please provide desired net length, frame color, any accessory needs, order quantity, and preferred delivery destination. This enables accurate pricing and lead‑time estimation.
Inspection includes dimensional checks, load testing of tension cords, UV exposure simulation, and visual inspection for coating integrity and labeling accuracy.
Standard packaging uses individual foam‑lined cartons; palletized packaging is offered for bulk orders with stretch film and corner protection.
Stock items ship within 10‑15 working days; customized orders require 20‑30 working days after final artwork approval.
Contact for Technical Inquiry
For detailed specifications, sample requests, or a formal quotation, please reach out to our engineering sales team. You may submit an inquiry form or email [email protected] with your project requirements.
