Low Price Portable Pickleball And Badminton Net Factory Sale
A portable net system that serves both pickleball and badminton must meet two distinct height requirements while remaining lightweight enough for frequent transport. The frame uses telescoping
Low Price Portable Pickleball and Badminton Net – Factory Direct Sale
A portable net system that serves both pickleball and badminton must meet two distinct height requirements while remaining lightweight enough for frequent transport.
The frame uses telescoping aluminum poles with a quick‑release pin system, allowing height adjustment from 0.914 m (pickleball) to 1.55 m (badminton) in under 15 seconds.
Net fabric is made from UV‑stabilized polyethylene with a 20 mm square mesh, providing a tensile strength of at least 150 N per square meter and resistance to sagging over 500 hours of outdoor exposure.
Design and Construction
The pole assembly consists of three interlocking sections per side, each with an external diameter of 38 mm and a wall thickness of 1.2 mm, giving a buckling load capacity of approximately 2.5 kN.
A central tensioning strap runs between the two pole bases, distributing load evenly and reducing lateral sway by up to 30 % compared with single‑strap designs.
Materials and Corrosion Resistance
All metal components are extruded from 6063‑T5 aluminum alloy, which offers a yield strength of about 210 MPa and forms a protective oxide layer that withstands salt‑spray testing for 500 hours.
The net edge is reinforced with a double‑stitched polyester tape (width 25 mm, tensile strength 30 kN) to prevent fraying under repeated impact.
Dimensions and Adjustability
| Parameter | Pickleball Setting | Badminton Setting | Adjustment Range |
|---|---|---|---|
| Height at center | 0.914 m | 1.55 m | 0.914 m – 1.55 m |
| Width (distance between poles) | 6.10 m | 6.10 m | Fixed |
| Net length | 6.10 m | 6.10 m | Fixed |
| Pole length per side | 2.10 m (three sections) | 2.10 m (three sections) | Fixed |
| Assembled weight | ≈4.8 kg | ≈4.8 kg | ±0.2 kg |
Portability and Setup
- Quick‑release pins enable pole extension or collapse without tools.
- Included carry bag measures 35 cm × 20 cm × 10 cm, protecting poles and net during transport.
- Total packaged weight under 5.5 kg, suitable for one‑person handling.
- Setup time from bag to ready‑to‑play is under 20 seconds for either sport.
- No ground anchors required for indoor use; optional ground spikes available for outdoor stability.
Applications in Sports Facilities and Recreation
Facilities that host both pickleball and badminton benefit from a single net system that eliminates the need for duplicate equipment, reducing storage space and capital expense.
Schools and community centers can quickly reconfigure multipurpose halls for after‑school programs, accommodating varying skill levels without permanent court markings.
Temporary event organizers, such as tournament operators or corporate wellness days, rely on the lightweight design for rapid deployment and teardown across multiple venues.
Quality Control and Testing
Each pole set undergoes dimensional verification with laser scanning, ensuring tolerances within ±0.5 mm on diameter and straightness.
Load testing applies a dynamic force of 1.2 kN to simulate net tension during play, confirming no permanent deformation after 10 000 cycles.
UV exposure chambers accelerate aging, verifying that net tensile strength retains at least 80 % of initial value after 1000 hours of simulated sunlight.
Customization Options
- Pole length can be increased in 10 cm increments for larger court layouts.
- Net color options include standard white, high‑visibility yellow, or custom Pantone matches.
- Branding logos can be heat‑transferred onto the net edge tape or pole sleeves.
- Packaging can be altered to include foam corner protectors or moisture‑barrier liners for overseas shipments.
Packaging and Shipping
Units are packed in double‑wall corrugated cartons with internal polyethylene foam inserts that immobilize poles and net.
Each carton includes a silica gel packet to limit internal humidity, reducing risk of corrosion during transit.
Palletized loads accommodate up to 48 units per standard pallet, stretch‑wrapped and corner‑boarded for stability.
Frequently Asked Questions
Can dimensions be customized?
Yes, pole length and net height adjustment range can be tailored to specific court sizes; contact sales with your requirements.
What information is required before quotation?
Please provide desired pole length, net color, any branding details, and quantity needed for accurate pricing.
What materials are available for the net?
Standard is UV‑stabilized polyethylene; alternative polyester or nylon meshes are available upon request.
How is quality inspected?
Inspection includes dimensional checks, load testing, and UV aging as outlined in the quality control section.
What packaging methods are available?
Standard carton with foam inserts; optional moisture‑barrier liners and reinforced corner protectors for export.
How are export shipments protected?
Pallets are stretch‑wrapped, corner‑boarded, and fitted with top and bottom load spreaders to prevent shifting.
What is the typical production lead time?
Lead time ranges from 15 to 25 working days depending on order size and customization level.
How are samples arranged?
Samples can be shipped via express courier; costs are credited against a subsequent order.
Contact for Quote
To discuss specifications, request a formal quotation, or arrange a sample shipment, please reach out to our sales team.
